3. BMS1201 Board Dimensions

For mechanical assembly purposes, given dimensions are given below could be used. Make sure to read all the instruction before do anything.

Info

All dimensions are in mm if otherwise is not defined.

Info

Simplifed STEP or STP files are avaliable upon request.

Warning

Take care about mounting hole coordinates. Don't bend or strain too much the board while installation. Board may take physically damage permanently.

Warning

Always use only mounting holes which shown by red dotted circle below. It is highly recommended to use plastic nuts and bolts.

Fig.3.1: BMS1201, Board Dimensions (FRONT)

Fig.3.2: BMS1201, Board Dimensions (TOP)

Danger

While using mounting tools, be careful to not to damage any electronic components on the board. You may make a permanent damage to the board if you use wrong size tools.