LiBat™ User Manual
The LiBat™ User Manual explains how to set up and run a battery system with a LiBat™ BMS: which value to choose for each setting, why, and how to check the result in LiMon™. It is written for pack builders and system integrators, and it is given to LiBat™ customers as a PDF. Ask for your copy with the button below, or through your LiBat™ contact; write in your message that you ask for the User Manual and which LiBat™ BMS you use.
Other pages of this wiki name a section of the manual, for example "User Manual 3.11 Button and Shutdown"; the list below shows where each section sits. The boards, their wiring, the communication protocols and every LiMon™ screen and setting are described on this wiki.
Table.1: Contents of the User Manual
| Chapter | Sections |
|---|---|
| 1. Overview | 1.1 About This Manual 1.2 System Concepts |
| 2. Commissioning | 2.1 Commissioning Checklist 2.2 Managing Settings 2.3 Updating Firmware |
| 3. Configuration | 3.1 Battery Topology 3.2 Capacity and SoC 3.3 Cell Voltage Limits 3.4 Cell Balancing 3.5 Temperature Limits 3.6 Current Measurement 3.7 Current Limits 3.8 Power Path 3.9 Precharge 3.10 Inputs and Outputs 3.11 Button and Shutdown |
| 4. Integration | 4.1 Communication Ports 4.2 Charger Integration 4.3 Parallel Packs |
| 5. Operation and Maintenance | 5.1 Protection and Recovery 5.2 Monitoring 5.3 Storage and Shutdown 5.4 Logs and Event History |
| 6. Troubleshooting | 6.1 Events and What to Do |